|
The Dana/Spicer Model 60 is an automotive axle manufactured by Dana Corp. and used in OEM pickup and limited passenger car applications by Chevrolet, Dodge, Chrysler, Jeep and Ford and Land Rover. Various construction companies use this axle. There are front and rear versions of the Dana 60. It can be readily identified by its straight axle tubes, 10 bolt asymmetrical cover, and a "60" cast in to the housing. Gross axle weight ratings are often lowered by the vehicle manufacturer for safety and tire reasons. They are also lowered to reduce loads on other powertrain components such as transmissions and transfer cases. == General specifications == Every Dana 60 that was originally manufactured by Dana Corp (i.e. not aftermarket) is stamped with a build date and bill of materials on the back of the right hand axle tube. * Gross Axle Weight Rating (GAWR) 6500 lbs. * Ring gear measures 9". * OEM Inner axle shaft spline counts are 16, 23, 30, 32, 33 and 35. * 40 Spline inner axle shafts and carriers are made for after market, high performance Dana 60 axles. * Pinion shaft diameter: 1.625" * Pinion shaft splines: 10 and 29 * Gear ratios: 3.31:1 - 7.17:1 * Carrier break: 3.31:1 - 4.10:1 and 4.56:1 - 7.17:1 * Axle Shaft diameter * *1.41” Front (32 Spline) * *1.46” Rear (32 Spline) * Axle spline diameter * *1.50” Front (35 Spline) * *1.50” Rear (35 Spline) 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Dana 60」の詳細全文を読む スポンサード リンク
|